| Place | Indoor |
|---|---|
| Cleaning Level | SA2.5 |
| Extruder | Single Screw Extruder |
| Method Type | Automatic |
| Coating Materials | Polyethylene, Adhesive, Epoxy |
| Place | Indoor |
|---|---|
| Cleaning Level | SA2.5 |
| Extruder | Single Screw Extruder |
| Method Type | Automatic |
| Coating Materials | Polyethylene, Adhesive, Epoxy |
| Place | Indoor |
|---|---|
| Cleaning Level | SA2.5 |
| Extruder | Single Screw Extruder |
| Method Type | Automatic |
| Coating Materials | Polyethylene, Adhesive, Epoxy |
| Place | Indoor |
|---|---|
| Cleaning Level | SA2.5 |
| Extruder | Single Screw Extruder |
| Method Type | Automatic |
| Coating Materials | Polyethylene, Adhesive, Epoxy |
| Type | Coating Production Line |
|---|---|
| Coating Layer | Internal Fbe And External 3lpe |
| Spray Gun Method | High Voltage Electrostatic Spray Gun |
| Applications | Oil, Natural Gas, And Water Supply Pipelines |
| Packaging Details | Wooden/Plastic Film |
| Coating | Powder Coating |
|---|---|
| Pipe Structure | Carrier Steel Pipe-Polyurethane Foam-HDPE Casing |
| Principle | High-Pressure Air Type |
| Application | Hot Chiller Water/Oil /Chemical Material Pipeline |
| Packaging Details | Wodden Box |
| Pipe Diameter | From 110mm To 2000mm |
|---|---|
| Raw Material | PE |
| Calibration Method | Vacuum And Water Spraying Cooling |
| Cutting Method | Planeatry Cutting |
| PLC | Siemens |
| Production Range | Pipe Diameter 110-600mm |
|---|---|
| Diameter Range | 110-2000mm |
| Calibration Method | Vacuum And Water Cooling |
| Cutting Method | Planeatry Cutting |
| Power | No-danger Zone |
| Automation | Automatic |
|---|---|
| Certification | CE, QS |
| Condition | New |
| Application | For Producing Pre-Insulated Pipe Jacket |
| Raw Material | PE |
| Coating | Powder Coating |
|---|---|
| Principle | High-Pressure Air Type |
| Application | Hot Chiller Water/Oil /Chemical Material Pipeline |
| Pipe Structure | Carrier Steel Pipe-Polyurethane Foam-HDPE Casing |
| Packaging Details | Wodden Box |