| Material | Quality I-beam Steel |
|---|---|
| Power | No Danger Zone |
| Coating Thickness | 3-3.5mm |
| Carrier Pipe | Metal |
| Extrusion Process | Multi-Layer Extrusion |
| Place | Indoor |
|---|---|
| Power | No Danger Zone |
| Moisture | 85% No Condensation |
| Cooling Water Recycling | ≤15℃,0.15-0.2МПа,0.5м³/мин |
| Extrusion Process | Multi-Layer Extrusion |
| Power Supply | 3 Phase 380V(-10%,+5%) 50HZ |
|---|---|
| Installed Capacity | About 750 KW |
| Cooling Water Recycling | ≤15℃,0.15-0.2МПа,0.5м³/мин |
| Moisture | 85% No Condensation |
| Extrusion Process | Multi-Layer Extrusion |
| Heating Method | Induction Heating |
|---|---|
| Temperature | 0-30℃ |
| Coating Type | 3PE, 2PE, Fbe |
| Moisture | 85% No Condensation |
| Extrusion Process | Multi-Layer Extrusion |
| Application | Steel Pipe Anticorrosion Coating |
|---|---|
| Power | No Danger Zone |
| Coating Type | 3PE, 2PE, Fbe |
| Anticorrosion | Epoxy |
| Extrusion Process | Multi-Layer Extrusion |
| Application | Steel Pipe Anticorrosion Coating |
|---|---|
| Operation Method | Automatic |
| Coating Type | 3PE, 2PE, Fbe |
| Heating Method | Induction Heating |
| Epoxy Powder Spraying Chamber | 304 Ss |
| Transmission System Power | 4KW |
|---|---|
| Warranty | 1 Year |
| Processing Capacity | 170mm |
| Roduction Range | 159mm |
| Total Power | 800kW |
| Machine Dimension | 30m*3m*2.5m |
|---|---|
| Available Material | Fbe Powder |
| Transmission System Power | 4KW |
| Corrosion Resistance | High |
| Adhesive Material | Epoxy |
| Control System | PLC Control |
|---|---|
| Product Model | 3LPE-32 |
| Material | HDPE/Hot Melt Adhesive/FBE Powder |
| Pipe Diameter | Φ219-Φ1420mm |
| Extrusion Capability | 350kg/H |
| Operation Mode | Automatic |
|---|---|
| Coating Type | 3LPE (Three Layer Polyethylene) |
| Location | Indoor |
| Application | Oil And Gas Pipeline Coating |
| Surface Treatment | Shot Blasting |