| Shear Strength | ≥110 N/cm |
|---|---|
| Tensile Strengt | 30 Mpa |
| Highlight | Pre Insulation Pipe Joints Sleeve |
| Highlight | ageing resistant heat shrinkable sleeve,ageing resistant pipeline heat shrink sleeves |
| Packaging Details | 6000PCS/Day |
| Structure | PE Backing+Adhesive |
|---|---|
| Aapplication | Protection Pipeline , Anticorrosion, Repair |
| Specification | 450, 500, 600, 650mm |
| Highlight | 450mm Heat Shrink Sleeve,500mm Pipeline Joint Sleeve,600mm Anticorrosion Heat Shrinkable Sleeve |
| Packaging Details | Standard Package |
| Shear Strength | ≥110 N/cm |
|---|---|
| Tensile Strengt | 30 Mpa |
| Highlight | Pre Insulation Pipe Joints Sleeve |
| Brand | Huashida |
| Certificate | CE,ISO,SGS |
| Screw No. | Single-screw |
|---|---|
| Aapplication | Protection Pipeline , Anticorrosion, Repair |
| Substrate Thickness | ≥0.6mm |
| Hot Melt Adhesive Thickness | 1.2mm |
| Highlight | Radiation Cross-Linked Heat Shrink Sleeve Production Line,Single-Screw Extruder Heat Shrink Tape Production Line,Intelligent Control System Pipeline Corrosion Protection Line |
| Waterproof | Waterproof |
|---|---|
| Application | Protection Pipeline , Anticorrosion, Repair |
| Structure | PE Backing+Adhesive |
| Specification | 450, 500, 600, 650mm |
| Highlight | Waterproof Heat Shrinkable Sleeve,450-650mm Heat Shrink Sleeve,PE Backing+Adhesive Pipeline Heat Shrink Sleeve |
| Part1 | Basic Film Extrusion Line |
|---|---|
| Part2 | Adhesive (EVA) Coating Line |
| Condition | New |
| Types Of Sheets That Can Be Produced | PE |
| Sleeve Thickness | 0.1-30mm |
| Materials | PP/PE/PS/HIPS/ABS/PVC |
|---|---|
| Thickness | 0.1-30mm |
| Width | 800mm-1600mm |
| Range | Single Layer, Double Layer, Multi-layer |
| Features | Low Energy Consumption, Low Noise |
| After-sales Service | Installation Training |
|---|---|
| Warranty | Installation Training |
| Product Type | PE Board |
| Board Layers | Multilayer |
| Screw No. | Single-screw |
| Water-Intake Rate | 0.05% (ASTM D570) |
|---|---|
| Tensile Strength | 15-20MPa (ASTM D638) |
| Shear Strength | ≥100n/Cm (DIN 30 672) |
| Adhesive Softening Point | 70-80°C (ASTM E 28) |
| Sleeve Thickness | 0.5-3mm |
| Operating Temperature | 60c-110c |
|---|---|
| Epoxy Primer Strength | ≥5.0MPa |
| Thickness | 1.2mm.1.6mm.1.8mm.2.0mm, 2.5mm |
| Peeling Strength | 70N |
| Adhesive Lap Shear | ≥1.0MPa |