| Pipe Surface Treatment | Shot Blasting, Pickling, Phosphating |
|---|---|
| Cooling Water | ≤15℃,0.15-0.2MPa,0.5m³/min |
| Usage | Making 3lpe Coating Pipe |
| Coating Material | Polyethylene, Adhesive, Epoxy |
| Cooling_Method | Water Cooling |
| Coating Material | Polyethylene Coating |
|---|---|
| Total Power | 200-300KW |
| Heating Method | Induction Heating |
| Machine Dimension | 30m*3m*2.5m |
| Cooling Method | Water Cooling |
| Pipe Material | Carbon Steel, Stainless Steel |
|---|---|
| Anticorrosion | Internal &External |
| Production Capacity | 200-1000m/h |
| Extrusion Capability | 350kg/H |
| Coating Material | Polyethylene, Adhesive, Epoxy Powder |
| Coating | Powder Coating |
|---|---|
| PE Layer Thickness | 2.5 - 3.7 Mm |
| Curvature Radius | 4-6 Times D |
| Elbow Angle | 15-90 Degrees |
| Specification | Pipe Dia. 426-820mm |
| MPa Classfication | Medium Pressure Piping |
|---|---|
| Temperature Classification | High Temperature Piping |
| Standard | ASTM, GB, DIN |
| Method Type | Automatic |
| Diameter | 57-325mm |
| Location | Indoor |
|---|---|
| Temperature | 0-30℃ |
| Chamber | Pipes 14”-90” |
| Cyclone | Ø1000 |
| Transmission System Specification | Length 3 M Width 0.85m |
| Type | Coating Production Line |
|---|---|
| Coating | PE Extrusion |
| Elbow Angle | 15-90 Degrees |
| Function | Anti-Corrosion And Heat Preservation |
| Packaging Details | Plastic Film and Wooden Pallet |
| Coating Thickness | 1.8-2.7mm |
|---|---|
| Control System | PLC Control |
| Coating Type | 3LPE (Three Layer Polyethylene) |
| Pipe Diameter Range | Φ219-Φ1420mm |
| Total Power | 900kW |
| Humidity | 85% Non Condensing |
|---|---|
| Raw Material | Steel Pipe |
| Insulation Material | Polyurethane Foam |
| Control System | PLC |
| Frequency | 50Hz/60Hz |
| Pipe Diameter Range | Φ219-Φ1420mm |
|---|---|
| Pipe Length | 1-3m |
| Brand Name | Huashida |
| Minimum Order Quantity | 1 Set |
| Operating Mode | Automatic/Manual |