| 304 Powder Fluidized Box | Vibrating Screen With Power Recovery |
|---|---|
| Cyclone Dust Collector | Dust Removal Efficiency 90% |
| High Voltage Electrostatic Spray Gun | Ultimate High Pressure 10kV |
| Filter Cartridge Dust Collector | Filter Air Volume 5500 Cubic Meters Per Hour |
| Coating Structure | Epoxy+Adhesive+PE |
| Spiral Conveyor | Steel Wheel |
|---|---|
| IF Heating Power Supply | 750KW |
| IF Coil | Adapt To 159-325 Pipe Diameter |
| Stainless Steel Powder Room | Material 304 Stainless Steel |
| Hydraulic Pressure Station | 11Kw |
| Pipe Uploading Table | 200x200 H-type Steel |
|---|---|
| Pipe Unloading Table | 200x200 H-type Steel |
| Hydraulic Pipe Lifting Truck | 11kw |
| Elbow Angle | 15-90 Degrees |
| Hydraulic Pressure Station | 11Kw |
| PE Layer Thickness | 2.5 - 3.7 Mm |
|---|---|
| Ad Copolymer Adhesive Thickness | 170-250 Um |
| Epoxy Powder Thickness | More Than 170 Um |
| Elbow Angle | 15-90 Degrees |
| Surface Treatment | Shotblasting SA2.5 |
| Material | Quality I-beam Steel |
|---|---|
| Type | V-wheel Convey |
| Up-tube Mode | Pneumatic Tube Pulling |
| Coating Structure | Epoxy Powder |
| Surface Treatment | Shotblasting SA2.5 |
| Material | Quality I-beam Steel |
|---|---|
| Power | No Danger Zone |
| Coating Thickness | 3-3.5mm |
| Carrier Pipe | Metal |
| Extrusion Process | Multi-Layer Extrusion |
| Place | Indoor |
|---|---|
| Power | No Danger Zone |
| Moisture | 85% No Condensation |
| Cooling Water Recycling | ≤15℃,0.15-0.2МПа,0.5м³/мин |
| Extrusion Process | Multi-Layer Extrusion |
| Power Supply | 3 Phase 380V(-10%,+5%) 50HZ |
|---|---|
| Installed Capacity | About 750 KW |
| Cooling Water Recycling | ≤15℃,0.15-0.2МПа,0.5м³/мин |
| Moisture | 85% No Condensation |
| Extrusion Process | Multi-Layer Extrusion |
| Heating Method | Induction Heating |
|---|---|
| Temperature | 0-30℃ |
| Coating Type | 3PE, 2PE, Fbe |
| Moisture | 85% No Condensation |
| Extrusion Process | Multi-Layer Extrusion |
| Application | Steel Pipe Anticorrosion Coating |
|---|---|
| Power | No Danger Zone |
| Coating Type | 3PE, 2PE, Fbe |
| Anticorrosion | Epoxy |
| Extrusion Process | Multi-Layer Extrusion |