This equipment is specifically designed for the surface treatment and three-layer polyethylene (3PE) coating of hot bending pipes, and is also suitable for dimensioned section steel and structural components. The integrated production line combines shot blasting, intermediate frequency heating, 3PE coating, and rapid cooling into one continuous process. It effectively removes surface rust, welding slag, and stress from the pipes while enhancing coating adhesion and improving the overall mechanical and anti-corrosion performance of the pipes.
| Applicable Pipes | Hot bend pipes with diameters of 426 mm, 630 mm, 720 mm, and 820 mm |
|---|---|
| Bending Radii | 4D to 6D |
| Bending Angles | 15° to 90° |
| Pipe Wall Thickness | 8 mm to 12 mm |
| Coating Thickness | Meets international anti-corrosion standards: epoxy powder layer ≥170 μm; adhesive layer 170–250 μm; polyethylene outer layer 2.5–3.7 mm |
| General Equipment Dimensions | Approximately 20 m × 15 m |
| Water Consumption | Around 30 cubic meters per cycle |
| Total Power Consumption | 450 kW, with gas usage of about 6 cubic meters per minute |
| Recommended Operating Temperature | Workshop indoor temperature no less than 5 °C |
Qingdao Huashida Machinery Co., Ltd was established in 2003. Since its inception, Huashida has focused on plastic polyurethane insulation pipe production lines, 3PE anti-corrosion pipe production lines, large-diameter underground pipe production lines, and plastic pipe joints for 20 years. We always attach great importance to research and development, collaborating closely with Beijing University of Chemical Technology, Qingdao University of Technology, and scientific research institutions. By absorbing advanced technology at home and abroad, after 20 years of endeavor we now rank among the top 3 manufacturers in the industry in China. Huashida machines have been well received in Saudi Arabia, Kazakhstan, Uzbekistan, the United Arab Emirates, Turkey, Russia, and other markets.