PVC/NBR/EPDM Foaming Aircondition Flexible Insulation rubber pipe machinery
Qingdao Huashida Machinery Co., Ltd. specializes in rubber extruders, HVAC insulation pipe machinery and rubber-plastic foam insulation pipe production lines.
Our self-developed synthetic rubber foam insulation tube & sheet production line adopts an automatic control system, proprietary core technologies and high-quality components to realize the efficient production of insulation tubes and sheets.
This rubber-plastic insulation pipe production line is developed based on advanced overseas technologies. The finished rubber foam tube is widely known as sponge tube. The production line mainly comprises rubber extruder, die, infrared radiation heating oven, foaming oven, haul-off unit and cutting machine.
Output: NBR foam tubes and sheets
Application Fields
Production Line
|
ü 环境条件 Work Environment |
|
|
地 点 Place |
Indoor |
|
电 源Power |
Safe place |
|
湿 度 Humidity |
85% no condensation |
|
温 度 Temperature |
0-55℃ |
|
ü 使用条件 Work Conditions |
|
|
电 源 Power |
3 phase 380V(-10%,+5%)50Hz or as requirement |
|
压缩空气 Compressed air |
0.4m³/min,>0.5MPa |
|
占地面积 Total footprint |
L 86 m * W 4m * 4 m |
|
主装机 Main power |
680kw (standard: 500kw) |
Extruder:
| Item | SJ-90/20 | SJ-120/20 | SJ-150/20 |
| Feeding Type | Side pressure roller+Feed housing | ||
| Feeding system | Feed roller gear, material: 20CrMoTi, carburizing treatment | ||
| Temperature control | MTC | ||
| Screw material | 38CrMoALA, nitriding depth 0.5-0.7mm | ||
| Screw diameter | 90mm | 120mm | 150mm |
| Screw rotation speed | 0-38r/min | 0-38r/min | 0-38r/min |
| L/D Ratio | 20:1 | 20:1 | 20:1 |
| Barrel and screw cooling | Water cycle | ||
| Solenoid Valve | Automatic control | ||
| Extruder center height | 1000mm±20mm | ||
| Plasticizing Output | 260-300kg/h | 450-500kg/h | 650-750kg/h |
| AC Variable Speed Motor | 90KW | 110KW | 160KW |
Equipment composition:
| No. | Equipment Name | Quantity | Type |
| 1 | Bale Cutter | 1 set | optional |
| 2 | Internal Mixer | 1 set | optional |
| 3 | Bucket Elevator | 1 set | optional |
| 4 | Open Mill | 1 set | optional |
| 5 | Guided Stock Bender for Open Mill | 1 set | optional |
| 6 | Cold feed rubber Extruder with MTC | 1 set | standard |
| 7 | Extrusion Die | xx set | standard |
| 8 | Transition roller | 1 unit | standard |
| 9 | Far infraredFoaming furnace | 1 set | standard |
| 10 | Hot air foaming furnace | xx set | standard |
| 11 | Conveying cooling platform | 1 set | standard |
| 12 | Haul-off Machine | 1 unit | standard |
| 13 | Cutter | 1 unit | standard |
| 14 | Winding Platform | 1 set | optional |
| 15 | PLC control system | 1 set | standard |
Note: The table shows the reference standard configuration, which can be customized according to customer requirements. Optional auxiliary equipment includes coding machine and multi-station centralized automatic batching system.
Production process:
Raw Material Inspextion→Rubber Cutting & Batching→Primary Internal Mixing→Aging→Catalytic Blending→Second Internal Mixing→Lifting and Transfering→Open mill sheeting→Air-drying&storage→Cold-feed Extrusion→Mold Forming→Oven Foaming→Cutting & Sizing→ Marking &Packaging ![]()
High extrusion speed
High degree of automation and security performance
Low maintenance cost
Low power consumption
Continuous vulcanization
Less labour required
Long durability
Lifelong technical support
![]()
![]()