Plastic Pipe Pulling Haul off Double Drawing Machine PE Pipe Production Line

Plastic Pipe Pulling Haul off Double Drawing Machine PE Pipe Production Line

---Pipe diameter range:16-63mm 75-250mm 160-315mm 200-450mm 315-630mm 500-800mm 630-1200mm
---The extrusion line comprise equipments and devices as below,
1set Vacuum loader
1set Hopper dryer
1set High-effeciency single screw extruder
1set 25/25 single screw extruder for mark line
1set Vacuum calibration table
2sets Water spraying tank
1set Hauling machine
1set Cutting machine
1set Stacker
 

1. Strong hauling force, especially suitable for hauling high-density pipe, such as pp/pe pipes.
2. Hauling force is well distributed according to the pipe.
3. 2, 3, 4or 6 claws are applied to hold and haul pipes evenly.
4. SCR step-less speed regulation, frequency control.
5. It is convenient and widely used.

Series plastic pipes, material drawer adopts double drawing method, thyristor step-less speed regulation, frequency conversion. Main and auxiliary, plastic extruder for plastic pipe material, soft pipe and to other plastic shaped materials. It is of wide application range, convenient use. The pipe haul off machine is mainly used to continuously and automatically pull various plastic pipes, soft Pipe and other profile after it is extruded, cooled, dried, printed by the tractor. Use caterpillar rubber
Block /belt metal fixture block to fit with different pipes of different materials, diameters and wall Thickness.
 

Production range: