| Coating | PE Extrusion |
|---|---|
| PE Layer Thickness | 2.5-3.7mm |
| Elbow Angle | 5D-8d |
| Bending Angle | 15-90 Degrees |
| Consists Of | First Fbe Coating, Middle Adhesive,Outer PE Layer |
| Tensile Strengt | 35 Mpa |
|---|---|
| Plastic Modling Type | Extruding |
| Cross Section Shape | Circular |
| Use | Pipe Anti-corrosion |
| Color | Black |
| Material | Steel |
|---|---|
| Type | Coating Production Line |
| Coating | PE |
| 3PE Structure | Epoxy+Adhesive+Extruded Polyethylene |
| Pipe Diameter | 50-4200mm |
| Feeding Mode | One Feed |
|---|---|
| Screw | Single-Screw |
| Screw Channel Structure | Deep Screw |
| Automation | Automatic |
| Extruder | Single Screw Extruder |
| Plastic Spiral Pipe Production Line (Dia. 300mm-1200mm) | 230kw |
|---|---|
| Material | HDPE/PP |
| Total Power | 230kw,400kw,520kw |
| Speed | 6-12m/H4-12m/H,2-5m/H,0.5-3 |
| Length | 23m,26m,32m,42m |
| Foaming Method | Spraying |
|---|---|
| Material | Steel |
| Insulation Layer Thickness | 20-100mm |
| Control System | PLC |
| Foaming Material | Polyurethane |
| Location | Indoor |
|---|---|
| Color | Black |
| Power Supply | No Dangerous Area |
| Humidity | 85% No Condensation |
| Temperature | 0-30℃ |
| Cooling Circulating Water | ≤20℃ ≥0.3Mpa 26~30 M3/h |
|---|---|
| Humidity | 85% Non Condensing |
| Compressed Air | 6 M3/min >0.5MPa |
| Pipe Usage | PU Pre-Insulation |
| Total Length | About 110m |
| Dimension | 26000*16000*5000 |
|---|---|
| Material | HDPE |
| Pipe Color | Black + Yellow Or Blue |
| Pipe Range | 300mm-1200mm |
| Extrusion Process | Multi-Layer Extrusion |
| Diameter Range | 300-3000mm |
|---|---|
| Material | HDPE/PP |
| Total Power | 230kw,400kw,520kw |
| Speed | 6-12m/H4-12m/H,2-5m/H,0.5-3 |
| Length | 23m,26m,32m,42m |